Tea Bag Packaging Machine Manufacturer tell you how to use tea bag packaging machine: Below introduction of tea packaging machines is the basic. 
Precautions before installing the tea packaging machine:
(1) Safe use of equipment
The power supply used in this packaging machine is three-phase four-wire or single-phase 220V. Connect the protective ground wire to the ground mark of the device before starting power up to ensure operator safety.

(2) Processing
A. Use fork-type driving equipment when the road is not flat or long. The machine must avoid rolling or bumping during operation. Avoid loose parts inside the machine or damage to external components.
B. When installing, avoid direct illumination of the strong light of the photoelectric head to prevent photoelectric induction failure.
C. When the machine uses 220 V as the power source, the neutral wire must be inserted and the casing must be reliably grounded.
D. The machine has higher requirements for the coordinated action of each mechanism, therefore, do not adjust the relative position of the various components in the machine. When adjustments are needed, they must be scrubbed by household personnel to ensure proper operation of the machine.
E. During the installation and commissioning process, many people are not allowed to operate at the same time to avoid accidents caused by improper coordination.

The above is the precautions for installing the tea packaging machine. If you need more information, please feel free to contact.

The following is a detailed introduction to the use, steps, maintenance and precautions of the tea packaging machine:

1. Usage methods and steps:

Inspection before start-up: Turn on the power of the packaging machine and check whether all parts of the machine are normal and whether there is any leakage of electricity, air, oil, etc. At the same time, check whether the heating element of the packaging machine is normal and whether the heat sealing temperature reaches the set value.
Choose the appropriate packaging film: Choose the appropriate packaging film according to the type and quality of the tea, such as PP film, vacuum film, etc. At the same time, select the appropriate packaging film specifications based on the tea weight and bag type.
Adjust heat sealing time: Adjust heat sealing time according to tea bag type and packaging film thickness to ensure heat sealing quality.
Bagging: Put the tea leaves into the packaging bag, pay attention to the quality and quantity of the tea leaves, and avoid filling too much or too little.
Sealing: Place the tea packaging bag in the sealing position of the packaging machine, step on the foot switch or press the sealing button, and the machine will automatically complete the sealing operation.
Cutting: After sealing is completed, the packaging machine will automatically cut off and then move the sealed tea bag to the designated position.

2. Maintenance method:

After daily use, dust and debris on the surface of the machine should be cleaned to keep the machine clean.
Regularly check whether the heating element and heat sealing device of the packaging machine are working properly, and replace them in time if there are any problems.

Regularly check the lubrication condition of the transmission device and gearbox of the packaging machine, and add lubricating oil in time to ensure the normal operation of the machine.

After the packaging machine has been used for a period of time, the wear and tear of each component should be checked, and if there is any problem, replace or repair it in time.

Regularly check whether the control system and circuit of the packaging machine are working properly, and eliminate any problems promptly.

3. Things to note:

Before use, you should carefully read the product instruction manual to understand the performance and usage of the packaging machine.
When the machine is running, it is prohibited to place hands or objects inside the machine or in the sealed area to avoid injury or damage to the machine.

When the machine fails, it should be stopped immediately and professionals should be notified for repair. Do not disassemble or repair by yourself.

During use, the quality of the tea should be ensured and foreign matter or odor should be avoided in the tea to avoid affecting the health of consumers.

During use, the area around the machine should be kept clean and hygienic to avoid the impact of debris and odor on the quality of tea.

During use, attention should be paid to observe whether the quality and sealing quality of the tea bag meet the requirements. If there are any problems, the packaging film should be adjusted or replaced in time.

During use, you should regularly check whether all parts of the machine are working properly. If there are any problems, you should promptly notify professionals to repair or replace parts.

After use, the power of the packaging machine should be turned off and the dust and debris on the surface of the machine should be cleaned. At the same time, add lubricating oil to each component to extend the service life of the machine.

During use, attention should be paid to keeping the machine clean and hygienic to avoid the impact of debris and dust on the performance and service life of the machine.

During use, attention should be paid to protecting the appearance and internal components of the machine to avoid damaging the machine or affecting its performance and service life.

In short, the correct use of tea packaging machines can effectively improve the quality and production efficiency of tea and extend the service life of the machine. At the same time, you also need to pay attention to the maintenance and upkeep of the machine during use to ensure that it operates normally and remains in good working condition.