OK

ok

When you use automatic coffee drip bag packing machine to produce the coffee bag, instant coffee bag or other products like flour, coffee powder, soy milk powder, starch, chemical powder powder by packing machine, you will need to deal with the powder packing machine regularly. So how to take care of the packing machine and adjust the Fiber Optic Sensor?

How to adjust Fiber Optic Sensor and automatic coffee drip bag packing machine:

1. The automatic packing machine requires the width of the cursor to be greater than 2mm and the length of more than 5mm. Red and yellow are used as the cursor, and the color scale of the same color as the photoelectric eye cannot be used as the cursor color.

2. The electric eye system should choose a very simple identification system, and cannot have the function of intelligent fixed length like the bag making machine. Therefore, in the longitudinal range of the electric eye cursor, the roll film is not allowed to have any interfering characters and patterns, otherwise it will cause recognition errors.

3. There will be an adjustment knob or a light source selection dial above the cursor of the automatic coffee powder packing machine. The positioning of the cursor point on the edge of the bag can be achieved by adjusting the knob and the light source selection.

4. Internal parameters. Generally speaking, after the cursor scanning is enabled, there is a link in the system to simulate the length, which can also be said to be a blind area. Generally, the bag length set by the automatic coffee bag packaging machine must be a few millimeters longer than the actual length of the bag, so that the system will consider it Where is the cursor point roughly to reduce the error rate of cursor power off.

If the automatic coffee drip bag packing machine you purchased finds that the positioning of Fiber Optic Sensor is deviated during operation. And also can contact us directly!